ZSYNC FEATURE

ZENTRACE

One measurement. One saved point. A clearer way back.

Range a location with a compatible Zentron LRF device. ZenTrace combines distance, device direction and your phone’s GPS to save a field coordinate in ZSYNC—so you can return toward the marked area with less searching.

Watch Field DemoSee How It Works

Q50R · C50R · M6-35R / M6 PRO · MEGA CQ25R
Features vary by model and firmware. See the setup guide for compatibility.

Download ZSYNC on the App StoreGet ZSYNC on Google Play
ZenTrace map showing saved targets, distance and compass guidance

Integrated LRF · Four platforms

Q50R with integrated laser rangefinderQ50RThermal ScopeC50R with integrated laser rangefinderC50RThermal Clip-OnM6-35R with integrated laser rangefinderM6-35R / M6 PROThermal MonocularMEGA CQ25R with integrated laser rangefinderMEGA CQ25R4-in-1 Thermal System
INTELLIGENT FIELD MARKING Save the point before you move.
01 · RANGE

Capture the distance

Measure the location with a compatible integrated LRF.

02 · SAVE

Create a field coordinate

ZSYNC combines range, direction and phone GPS.

03 · RETURN

Follow map guidance

Review bearing and distance as you move toward the saved point.

WHY ZENTRACE

Turn a measurement into a point you can return to.

ZenTrace turns measured distance and device direction into a saved field reference in ZSYNC, then shows direction and distance as you move.

01

Range the location

Measure from a compatible Zentron LRF device while the location is still visible.

02

Save the field point

ZSYNC combines the measurement, device direction and phone GPS into a calculated marker.

03

Navigate back

Open the marker to see direction, distance and map guidance as you return toward the saved area.

HOW IT WORKS

From measurement to map guidance.

A compatible Zentron device captures the measurement. ZSYNC turns it into a saved point you can use in the field.

  1. Compatible device taking a target measurement

    Measure

    Use the device laser rangefinder to measure the target.

  2. Device connected through Wi-Fi and Bluetooth

    Connect

    Pair the compatible device with ZSYNC over Wi-Fi and Bluetooth.

  3. Measurement information syncing to the phone

    Sync

    Transfer measured distance and device direction to the phone.

  4. Phone GPS and device data calculating a target point

    Calculate

    ZenTrace combines the device data with phone GPS.

  5. Saved target marker shown on the ZenTrace map

    Navigate

    Select the saved marker and follow the in-app map guidance.

MARK YOUR WAY

Mark it your way.

Calculated automatic target point

Automatic Marker

On supported weapon-mounted devices, ZenTrace can generate a calculated marker after recoil.

Multiple saved markers in the ZenTrace map interface

Manual Marker

Place a marker directly on the map for handheld, observation or custom field workflows.

Map-based target retrieval

Map Navigation

Review the saved coordinate, distance and direction before moving toward the marked point.

FIELD DEMO

See ZenTrace in the field.

Watch the compatible device connect to ZSYNC, transfer measurement data, create a marker and return to the saved location on the map.

ZenTrace field workflow shown in the ZSYNC mobile app.

DEVICE CLIPS

ZenTrace on two platforms.

C50R

C50R and ZSYNC, followed by a view through the device.

Feature availability depends on device, firmware and app version.

BEFORE YOU START

Ready before you head out.

  • Install the latest ZSYNC app from the App Store or Google Play.
  • Connect the compatible device to the phone over Wi-Fi.
  • Enable Bluetooth and switch the device to ZenTrace mode.
  • Allow location, Bluetooth and required data permissions.
  • Confirm the phone and device have enough battery for field use.
GET STARTED

Take ZenTrace into the field.

Install ZSYNC, review the USA quick guide and contact the Zentron USA team if you need help with setup or compatibility.

View ZenTrace GuideContact Zentron USA